PRODUCT CODE: F-P91-1650
Timber Stop Bevelled Post finishing 91 x 91

Stop bevelled timber post. Ex 100mm x 100mm finishing 91 x 91mm

All posts can be cut down to suit your size. Normally trimmed at the top so you have a longer stop chamfer at the bottom. Half posts can be machined on request.

F-P91-1650 = 1650mm

F-P91-1900 = 1900mm

F-P91-2200 = 2200mm

F-P91-2400 = 2400mm

Please note Redwood is a softwood and is subject to medium movement. As a natural product it can be subject to splits.Regardless of how well dried a piece of wood is it will always grow and shrink according seasonal changes in relative humidity of the air. Changes in ambient humidity is all that is needed and will always affect timber regardless of any other influences.

Whilst our posts are preservative treated they are stored in an environment which mirrors the external use they are intended for. Please note they should not be stored in a heated environment and should be treated (paint/stain) as soon as possible.

• The timber is FSC COC European redwood, kiln dried. Finish Planed all round timber. All seen surfaces are sanded.
• Clear preservative treated.
• The posts are stop bevelled to four edges, 400mm from each end.
• Structural suitability calculations to find the load should be obtained to prove the suitability of the product for your application. 
• Price excludes delivery, product is available for 2 day delivery
• See our post bases section for longer life fitting solutions

If showing out of stock, please contact us as normally delivery can be made within 7 to 10 days.

Bulk orders please contact us as discounts may apply and the most economic delivery charges can be agreed.

Please see our range of Post Bollard bases which work with the finished sizes. Note some minor adjustments might be required on site.